source: freebsd-mos-driver/if_mosreg.h@ 406

/*-
 * Copyright (c) 2010, 2011 Rick van der Zwet <info@rickvanderzwet.nl>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*-
 * Copyright (c) 2008 Johann Christian Rode <jcrode@gmx.net>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/*-
 * Copyright (c) 1997, 1998, 1999, 2000-2003
 *      Bill Paul <wpaul@windriver.com>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Ravikanth.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul, THE VOICES IN HIS HEAD OR
 * THE CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/*
 * Register definitions for the Moschip MCS7x30 ethernet controller.
 */
#define MOS_MCAST_TABLE         0x00
#define MOS_IPG0                0x08
#define MOS_IPG1                0x09
#define MOS_PHY_DATA0           0x0a
#define MOS_PHY_DATA1           0x0b
#define MOS_PHY_CTL             0x0c
#define MOS_PHY_STS             0x0d
#define MOS_PHY_DATA            MOS_PHY_DATA0
#define MOS_CTL                 0x0e
#define MOS_MAC0                0x0f
#define MOS_MAC1                0x10
#define MOS_MAC2                0x11
#define MOS_MAC3                0x12
#define MOS_MAC4                0x13
#define MOS_MAC5                0x14
#define MOS_MAC                 MOS_MAC0
/* apparently only available on hardware rev. C */
#define MOS_FRAME_DROP_CNT      0x15
#define MOS_PAUSE_TRHD          0x16

#define MOS_PHYCTL_PHYADDR      0x1f
#define MOS_PHYCTL_WRITE        0x20
#define MOS_PHYCTL_READ         0x40

#define MOS_PHYSTS_PHYREG       0x1f
#define MOS_PHYSTS_READY        0x40
#define MOS_PHYSTS_PENDING      0x80

#define MOS_CTL_RX_PROMISC      0x01
#define MOS_CTL_ALLMULTI        0x02
#define MOS_CTL_SLEEP           0x04
#define MOS_CTL_TX_ENB          0x08
/*
 * The documentation calls this bit 'reserved', but in the FreeBSD driver
 * provided by the vendor, this enables the receiver.
 */
#define MOS_CTL_RX_ENB          0x10
#define MOS_CTL_FDX_ENB         0x20
/* 0 = 10 Mbps, 1 = 100 Mbps */
#define MOS_CTL_SPEEDSEL        0x40
/* 0 = PHY controls speed/duplex mode, 1 = bridge controls speed/duplex mode */
#define MOS_CTL_BS_ENB          0x80

#define MOS_RXSTS_SHORT_FRAME   0x01
#define MOS_RXSTS_LENGTH_ERROR  0x02
#define MOS_RXSTS_ALIGN_ERROR   0x04
#define MOS_RXSTS_CRC_ERROR     0x08
#define MOS_RXSTS_LARGE_FRAME   0x10
#define MOS_RXSTS_VALID         0x20
/*
 * The EtherType field of an Ethernet frame can contain values other than
 * the frame length, hence length errors are ignored.
 */
#define MOS_RXSTS_MASK          0x3d

#define MOS_PAUSE_TRHD_DEFAULT  0
#define MOS_PAUSE_REWRITES      3

#define MOS_TIMEOUT             1000

#define MOS_RX_LIST_CNT         1
#define MOS_TX_LIST_CNT         1

/* Maximum size of a fast ethernet frame plus one byte for the status */
#define MOS_BUFSZ               (ETHER_MAX_LEN+1)

/*
 * USB endpoints.
 */
#define MOS_ENDPT_RX            0
#define MOS_ENDPT_TX            1
#define MOS_ENDPT_INTR          2
#define MOS_ENDPT_MAX           3

/*
 * USB vendor requests.
 */
#define MOS_UR_READREG          0x0e
#define MOS_UR_WRITEREG         0x0d

#define MOS_CONFIG_NO           1
#define MOS_IFACE_IDX           0

#define MCS7730 0x0001
#define MCS7830 0x0002

#define MOS_INC(x, y)           (x) = (x + 1) % y

struct mos_softc {
        struct usb_ether sc_ue;
        struct ifnet ifp;

        struct mtx sc_mtx;
        struct usb_xfer *sc_xfer[MOS_ENDPT_MAX];

        uint16_t mos_flags;

        int     mos_link;
        unsigned char mos_ipgs[2];
        unsigned char mos_phyaddrs[2];
};

#define GET_MII(sc)             uether_getmii(&(sc)->sc_ue)
#define MOS_LOCK(_sc)           mtx_lock(&(_sc)->sc_mtx)
#define MOS_UNLOCK(_sc)         mtx_unlock(&(_sc)->sc_mtx)
#define MOS_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t)