###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.2.2
#
# Last Modified: 05-31-2007
#
# NOTES: This config file provides you with some example command definitions
#        that you can reference in host, service, and contact definitions.
#       
#        You don't need to keep commands in a separate file from your other
#        object definitions.  This has been done just to make things easier to
#        understand.
#
###############################################################################


################################################################################
#
# SAMPLE NOTIFICATION COMMANDS
#
# These are some example notification commands.  They may or may not work on
# your system without modification.  As an example, some systems will require 
# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
#
################################################################################


# 'notify-host-by-email' command definition
define command{
	command_name	notify-host-by-email
	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
	}

# 'notify-service-by-email' command definition
define command{
	command_name	notify-service-by-email
	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
	}





################################################################################
#
# SAMPLE HOST CHECK COMMANDS
#
################################################################################


# This command checks to see if a host is "alive" by pinging it
# The check must result in a 100% packet loss or 5 second (5000ms) round trip 
# average time to produce a critical error.
# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)

# 'check-host-alive' command definition
define command{
        command_name    check-host-alive
        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 10
        }




################################################################################
#
# SAMPLE SERVICE CHECK COMMANDS
#
# These are some example service check commands.  They may or may not work on
# your system, as they must be modified for your plugins.  See the HTML 
# documentation on the plugins for examples of how to configure command definitions.
#
# NOTE:  The following 'check_local_...' functions are designed to monitor
#        various metrics on the host that Nagios is running on (i.e. this one).
################################################################################

# 'check_local_disk' command definition
define command{
        command_name    check_local_disk
        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
        }


# 'check_local_load' command definition
define command{
        command_name    check_local_load
        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
        }


# 'check_local_procs' command definition
define command{
        command_name    check_local_procs
        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
        }


# 'check_local_users' command definition
define command{
        command_name    check_local_users
        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
        }


# 'check_local_swap' command definition
define command{
	command_name	check_local_swap
	command_line	$USER1$/check_swap -w $ARG1$ -c $ARG2$
	}


# 'check_local_mrtgtraf' command definition
define command{
	command_name	check_local_mrtgtraf
	command_line	$USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
	}


################################################################################
# NOTE:  The following 'check_...' commands are used to monitor services on
#        both local and remote hosts.
################################################################################

# 'check_ftp' command definition
define command{
        command_name    check_ftp
        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_hpjd' command definition
define command{
        command_name    check_hpjd
        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
        }


# 'check_snmp' command definition
define command{
        command_name    check_snmp
        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_http' command definition
define command{
        command_name    check_http
        command_line    $USER1$/check_http -I $HOSTADDRESS$ -f follow $ARG1$
        }

# 'check_dns' command definition
define command{
        command_name    check_dns
        command_line    $USER1$/check_dns -A -H $HOSTNAME$ -s $HOSTADDRESS$ $ARG1$
        }


# 'check_ssh' command definition
define command{
	command_name	check_ssh
	command_line	$USER1$/check_ssh $ARG1$ $HOSTADDRESS$
	}


# 'check_dhcp' command definition
define command{
	command_name	check_dhcp
	command_line	$USER1$/check_dhcp $ARG1$
	}


# 'check_ping' command definition
define command{
        command_name    check_ping
        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
        }


# 'check_pop' command definition
define command{
        command_name    check_pop
        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
        }


# 'check_imap' command definition
define command{
        command_name    check_imap
        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
        }


# 'check_smtp' command definition
define command{
        command_name    check_smtp
        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
        }


# 'check_tcp' command definition
define command{
	command_name	check_tcp
	command_line	$USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
	}


# 'check_udp' command definition
define command{
	command_name	check_udp
	command_line	$USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
	}


# 'check_nt' command definition
define command{
	command_name	check_nt
	command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
	}

# $ sudo fetch -o/usr/local/libexec/nagios http://nagios.manubulon.com/check_snmp_int.pl
# $ sudo chmod 755 /usr/local/libexec/nagios/check_snmp_int.pl
# $ sudo make -C /usr/ports/net-mgmt/p5-Net-SNMP install clean
define command {
	command_name	check_snmp_int
	command_line	$USER1$/check_snmp_int.pl -H $HOSTADDRESS$ -C 'public!' -2 -f -n $ARG1$
}

define command {
	command_name	check_ntp_peer
	command_line	$USER1$/check_ntp_peer -H $HOSTADDRESS$ 
}

################################################################################
#
# SAMPLE PERFORMANCE DATA COMMANDS
#
# These are sample performance data commands that can be used to send performance
# data output to two text files (one for hosts, another for services).  If you
# plan on simply writing performance data out to a file, consider using the 
# host_perfdata_file and service_perfdata_file options in the main config file.
#
################################################################################


# # 'process-host-perfdata' command definition
# define command{
# 	command_name	process-host-perfdata
# 	command_line	/usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/spool/nagios/host-perfdata.out
# 	}
# 
# 
# # 'process-service-perfdata' command definition
# define command{
# 	command_name	process-service-perfdata
# 	command_line	/usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/spool/nagios/service-perfdata.out
# 	}

define command{
        command_name    process-service-perfdata-file
        command_line    /usr/local/libexec/process_perfdata.pl --bulk=/var/spool/nagios/service-perfdata
 }

define command{
        command_name    process-host-perfdata-file
        command_line    /usr/local/libexec/process_perfdata.pl --bulk=/var/spool/nagios/host-perfdata
 }


# 'check-host-alive' command definition (ipv6)
define command{
        command_name    check_ping_ipv6
        command_line    $USER1$/check_ping -6 -H $HOSTNAME$ -w 3000.0,80% -c 5000.0,100% -p 10
        }

define command{
        command_name    check_ping_ipv6_addr
        command_line    $USER1$/check_ping -6 -H $ARG1$ -w 3000.0,80% -c 5000.0,100% -p 10
        }