[[PageOutline(1-3,"Table of Content")]]
= Initial disk configuration =
{{{
## Hack to find memory card and have partion entries re-read
# - No cards:
#   dd: /dev/da0: Device not configured
# - Inactive card:
#   dd: /dev/da4: Operation not permitted
# - Active card:
#   0+0 records in
#   0+0 records out
#   0 bytes transferred in 0.000018 secs (0 bytes/sec)
}}}
build# ls /dev/da? | xargs -I %%DA%% -n 1 dd if=/dev/zero of=%%DA%% count=0
build# setenv DA /dev/da0

Hack to __really__  have all old partition information is detroyed:
build# dd if=/dev/zero of=$DA bs=1m count=1

build# fdisk -BI $DA
build# echo "a: * * 4.2BSD" | bsdlabel -R -B -m i386 ${DA}s1 /dev/stdin
build# newfs ${DA}s1a
build# mount ${DA}s1a /mnt

= Disk population =

build# setenv RELEASE 8.0-RELEASE
build# mkdir -p /usr/data/$RELEASE
build# cd /usr/data/$RELEASE

build# mkdir kernels base manpages
build# (cd base; echo 'mget *' | ftp -i ftp://ftp.nl.freebsd.org/pub/FreeBSD/releases/i386/$RELEASE/base/)
build# (cd kernels; echo 'mget *' | ftp -i ftp://ftp.nl.freebsd.org/pub/FreeBSD/releases/i386/$RELEASE/kernels/)
build# (cd manpages; echo 'mget *' | ftp -i ftp://ftp.nl.freebsd.org/pub/FreeBSD/releases/i386/$RELEASE/manpages/)

More sophisticated approach (rsync not in base):
build# rsync -vaz ftp.nl.freebsd.org::FreeBSD/releases/i386/$RELEASE/kernels .


build# setenv DESTDIR /mnt

build# (cd base; cat base.?? | tar --unlink -xpzf - -C $DESTDIR)
build# (cd kernels; sh install.sh generic)
build# (cd manpages; sh install.sh)

Activate right kernel:
build# rm -r /mnt/boot/kernel/ ; mv /mnt/boot/GENERIC/ /mnt/boot/kernel

= Disk configuration =

Need resolving power at later stage inside chroot:
build# cp /etc/resolv.conf /mnt/etc/
build# chroot /mnt

Important: if you FAIL to chroot and continue you will now start destroying your build system

Need rw on first boot for ssh keys and such:
chroot# echo "/dev/ad0s1a / ufs rw,noatime 0 0" > /etc/fstab
On Soekris net4801 v1.33 Flash is secondary:
chroot# echo "/dev/ad1s1a / ufs rw,noatime 0 0" > /etc/fstab

{{{
chroot# cat <<EOF > /boot/loader.conf
console=comconsole
autoboot_delay=3

hw.ata.ata_dma=0   # Soekris boot failure
EOF
}}}

Serial console boot only:
chroot# echo "-h" > /boot.config

Enable serial console:
chroot# sed '/ttyu0/ s/off/on /' /etc/ttys > /etc/ttys.new && mv /etc/ttys.new /etc/ttys

Cosmetic: disable all vidconsoles as a soekris embedded device does not have any:
chroot# sed '/ttyv[0-7]/ s/on /off/g' /etc/ttys > /etc/ttys.new && mv /etc/ttys.new /etc/ttys

== Accounting & access control ==
chroot# echo "sshd_enable=YES" >> /etc/rc.conf
chroot# pw usermod root -w random

Administive user (admin for example):
chroot# pw useradd admin -G wheel -c 'Admin User' -s /bin/csh -m -w random
chroot# echo '%wheel ALL=(ALL) ALL' >> /usr/local/etc/sudoers

== Networking ==
chroot# echo "hostname=riff.vanderzwet.net" >> /etc/rc.conf

Package installation using 7.2 kernel and 8.0-RC2 world is core dumping, postponing for later stage

Make any other optional changes before first boot inside chroot(8):
chroot# vi /etc/rc.conf


chroot# exit
build# umount /mnt

= Initial boot =
Note: NOT READY YET: Insert card into embedded define and get yourself a prompt, using serial of ssh login. 
== Package install ==

=== dnsmasq ===

dnsmasq used for local network dns and dhcp:
node# pkg_add -r dnsmasq
node# echo "dnsmasq_enable=YES" >> /etc/rc.conf

{{{
node# cat <<EOF > /usr/local/etc/dnsmasq.conf
interface=sis0

dhcp-range=192.168.42.100,192.168.42.200

domain=vanderzwet.net
EOF
}}}

=== ntp ===
node# echo "ntpd_enable=YES" >> /etc/rc.conf
{{{
node# cat <<EOF > /etc/ntp.conf
server 0.nl.pool.ntp.org
server 1.nl.pool.ntp.org
server 2.nl.pool.ntp.org

driftfile /var/db/ntp.drift
EOF
}}}

=== motd ===

node# (sed '3,$ d' /etc/motd; echo "WWW: http://rickvanderzwet.nl" ) > /etc/motd.new; mv /etc/motd.new /etc/motd 

=== Flash disk protection ===
node# echo "update_motd=NO" >> /etc/rc.conf
node# echo "tmpmfs=YES" >> /etc/rc.conf
Tip: You could make /var completely read-only, but I hate the details like package management getting lost. Flash cards these days are cheap anyways

Optional: Make read-only:
node# echo "varmfs=YES" >> /etc/rc.conf
node# sed '/1a/ s/rw/ro/' /etc/fstab > /etc/fstab.new; mv /etc/fstab.new /etc/fstab

=== various ===
node# pkg_add -r tinyproxy sudo vim-lite

= Put into production =
node# reboot