The Leynew TC420 Programmable LED controller is sold under many different names. Recognized under Linux as: {{{ [31937.370084] hid-generic 0003:0888:4000.000B: hiddev97,hidraw3: USB HID v1.10 Device [LEYNEW Time Controller] on usb-0000:00:14.0-4/input0 [31946.570781] usb 3-4: USB disconnect, device number 11 [31951.725531] usb 3-1: new full-speed USB device number 12 using xhci_hcd [31951.852410] usb 3-1: New USB device found, idVendor=0888, idProduct=4000, bcdDevice= 0.00 [31951.852413] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1 [31951.852416] usb 3-1: Product: Time Controller [31951.852418] usb 3-1: Manufacturer: LEYNEW [31951.852420] usb 3-1: SerialNumber: LEYNEW }}} 1. The controller has it own TC420 [http://www.tc420.net hardware fan page] how-ever support for Linux is lacking it seems. 1. The windows software program is called PLed, for those without CD-ROM drive, I have attached the CD-ROM content. 1. The PLed program can be started using Wine, how-ever the HID device does not get detected. Since reverse-engineering a Windows Program for it's HID calls seems quite some work I will to see if I can flash my own software on the unit. It is running a [https://www.st.com/en/microcontrollers/stm32f103c8.html STM32F103C8]T6 chip. I ordered an [https://www.ebay.com/sch/i.html?_nkw=ST-Link+V2+Programming+Unit ST-LINKv2 programmer] and [https://www.ebay.com/sch/i.html?_nkw=stm32f103c8t6 development board], so hopefully I can start to program the chip 'soonish' via [https://github.com/texane/stlink STLINK]. To be continued...