Changes between Version 26 and Version 27 of Mendel3DPrinter


Ignore:
Timestamp:
03/11/18 22:24:56 (6 years ago)
Author:
Rick van der Zwet
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Mendel3DPrinter

    v26 v27  
    148148=== March 10, 2018
    149149==== Heatbed too slow
    150 Tried hacking longer timeouts, yet no luck. Current heatbed cannot generate enough heat for 2 degrees per 60 seconds above 45 degrees.
     150Tried hacking longer timeouts, yet no luck. Current heatbed cannot generate enough heat for 2 degrees per 60 seconds above 45 degrees. How-ever when constantly on it will roughly stabilize at 65 degrees, so no firmware controlled heatbed for now.
     151
     152====  Cura does not print
     153First of all the Mendel printer is not supported in firmware, manually adding the printer will failed to print my test properly. It simpely does not move the X-axis.