| Version 8 (modified by , 7 years ago) ( diff ) |
|---|
- Pre-printed parts by Mendel Parts (Mendel v2): http://reprap.org/wiki/Prusa_Mendel_(iteration_2)
- Elektronic board: http://reprap.org/wiki/Megatronics_2.0
- Running Marlin firmware: https://github.com/rickvanderzwet/Marlin/
Some handy pages to get started:
[rick@rvdzwet-wasus Marlin]$ lsb_release -a LSB Version: :core-4.1-amd64:core-4.1-noarch:cxx-4.1-amd64:cxx-4.1-noarch:desktop-4.1-amd64:desktop-4.1-noarch:... Distributor ID: Fedora Description: Fedora release 27 (Twenty Seven) Release: 27 Codename: TwentySeven [rick@rvdzwet-wasus ~]$ arduino java.awt.HeadlessException at java.awt.SplashScreen.getSplashScreen(SplashScreen.java:117) at processing.app.Base.<init>(Base.java:206) at processing.app.Base.main(Base.java:135) [rick@rvdzwet-wasus ~]$ rpm -qa | grep openjdk java-1.8.0-openjdk-headless-1.8.0.161-5.b14.fc27.x86_64 [rick@rvdzwet-wasus ~]$ sudo dnf install java-1.8.0-openjdk [rick@rvdzwet-wasus ~]$ arduino java.awt.HeadlessException: No X11 DISPLAY variable was set, but this program performed an operation which requires it. at java.awt.SplashScreen.getSplashScreen(SplashScreen.java:117) at processing.app.Base.<init>(Base.java:206) at processing.app.Base.main(Base.java:135) /usr/share/arduino/hardware/arduino/avr/boards.txt ############################################################## megatronics.name=Megatronics megatronics.upload.tool=avrdude megatronics.upload.protocol=wiring megatronics.upload.maximum_size=258048 megatronics.upload.speed=115200 megatronics.bootloader.low_fuses=0xFF megatronics.bootloader.high_fuses=0xDA megatronics.bootloader.extended_fuses=0xF5 megatronics.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex megatronics.bootloader.unlock_bits=0x3F megatronics.bootloader.lock_bits=0x0F megatronics.build.mcu=atmega2560 megatronics.build.board=AVR_MEGATRONICS megatronics.build.f_cpu=16000000L megatronics.build.core=arduino megatronics.build.variant=mega
Difference between thermistor and thermocouple: https://electronics.stackexchange.com/questions/24975/differences-between-thermistors-and-thermocouples
start echo: External Reset Marlin 1.1.8 echo: Last Updated: 2017-12-25 12:00 | Author: (none, default config) echo:Compiled: Mar 10 2018 echo: Free Memory: 5418 PlannerBufferBytes: 1264 echo:Hardcoded Default Settings Loaded echo: G21 ; Units in mm echo:Filament settings: Disabled echo: M200 D3.00 echo: M200 D0 echo:Steps per unit: echo: M92 X80.00 Y80.00 Z4000.00 E500.00 echo:Maximum feedrates (units/s): echo: M203 X300.00 Y300.00 Z5.00 E25.00 echo:Maximum Acceleration (units/s2): echo: M201 X3000 Y3000 Z100 E10000 echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel> echo: M204 P3000.00 R3000.00 T3000.00 echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_us> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk> echo: M205 S0.00 T0.00 B20000 X10.00 Y10.00 Z0.30 E5.00 echo:Home offset: echo: M206 X0.00 Y0.00 Z0.00 echo:PID settings: echo: M301 P22.20 I1.08 D114.00 ok T:18.87 /0.00 B:23.38 /0.00 @:0 B@:0
Note:
See TracWiki
for help on using the wiki.
