Version 4 (modified by 13 years ago) ( diff ) | ,
---|
Introduction
- Device : http://routerboard.com/RB493G
- Mission : Install FreeBSD on it to run it as home router.
- Reason : a) Energy consumption vs Performance: Low powered high specs device. b) Getting FreeBSD to run on MIPS based devices. c) Work with large amount of Ethernet ports.
Tech
- AR7161 MIPS 24k (mips32r2) 680MHz PCI, GMII/RGMII/MII (GigE), UART, USB 2.0, PCM, I2S
References
- http://wiki.freebsd.org/FreeBSD/mips
- http://loos.no-ip.org/routerboard/
- http://lists.freebsd.org/pipermail/freebsd-mips/2011-January/001371.html
Status
- 30/01/2012 - Board is not booting yet.
- 30/01/2012 - Building world/and kernel.
RouterBOOT booter 2.29 RouterBoard 493G CPU frequency: 680 MHz Memory size: 256 MB Press any key within 2 seconds to enter setup. RouterBOOT-2.29
Board Info: Board type: 493G Serial number: 25E001744DD7 Firmware version: 2.29 CPU frequency: 680 MHz Memory size: 256 MB Build time: 2010-12-09 15:21:33 eth1 MAC address: 00:0C:42:A9:15:60 eth2 MAC address: 00:0C:42:A9:15:61 eth3 MAC address: 00:0C:42:A9:15:62 eth4 MAC address: 00:0C:42:A9:15:63 eth5 MAC address: 00:0C:42:A9:15:64 eth6 MAC address: 00:0C:42:A9:15:65 eth7 MAC address: 00:0C:42:A9:15:66 eth8 MAC address: 00:0C:42:A9:15:67 eth9 MAC address: 00:0C:42:A9:15:68
Note:
See TracWiki
for help on using the wiki.