- Firmware version 1.9.16: http://download.kobobooks.com/firmwares/kobo3/bowfin/kobo3-update-1.9.16.zip
- Some hints the desktop application running using Wine: http://www.dawning.ca/2010/kobo-ereader-unboxed-linux/
- Excellent guide of hacking telnet & ftp onto the device: http://www.chauveau-central.net/pub/KoboTouch/
[root@(none) /]# dmesg
Linux version 2.6.35.3-568-g4cf53cf-00050-g1422e3c-dirty (george@dilemma) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #2 PREEMPT Fri Oct 14 12:23:27 EDT 2011
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX50 ARM2 Board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 803ab5d0, node_mem_map 803cb000
DMA zone: 192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 24384 pages, LIFO batch:3
Normal zone: 320 pages used for memmap
Normal zone: 40640 pages, LIFO batch:7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttymxc0,115200 rootfstype=ext4 rootwait rw video=mxcepdcfb:E60_V220 quiet lpj=3997696 root=/dev/mmcblk0p1
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 256016k/256016k available, 6128k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xf9e00000 - 0xffe00000 ( 96 MB)
vmalloc : 0x90800000 - 0xf4000000 (1592 MB)
lowmem : 0x80000000 - 0x90000000 ( 256 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.init : 0x80008000 - 0x80023000 ( 108 kB)
.text : 0x80023000 - 0x80359000 (3288 kB)
.data : 0x80372000 - 0x803ac320 ( 233 kB)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:368
MXC GPIO hardware
MXC IRQ initialized
You should not call the gpmi_set_parent
MXC_Early serial console at MMIO 0x53fbc000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 799.53 BogoMIPS (lpj=3997696)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 KB@0x90840000
CPU is i.MX50 Revision 1.1
Using SDMA I.API
MXC DMA API initialized
IMX usb wakeup probe
the wakeup pdata is 0x8037e3fc
IMX usb wakeup probe
the wakeup pdata is 0x8037e4a8
bio: create slab <bio-0> at 0
SCSI subsystem initialized
CSPI: mxc_spi-0 probed
CSPI: mxc_spi-2 probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PMIC Light driver loading...
cfg80211: Calling CRDA to update world regulatory domain
mc13892 Rev 2.1 FinVer 2 detected
Initializing regulators for mx50 arm2.
regulator: SW1: 600 <--> 1375 mV at 1150 mV
regulator: SW2: 900 <--> 1850 mV at 1225 mV
regulator: SW3: 900 <--> 1850 mV at 1200 mV
regulator: SW4: 1100 <--> 1850 mV at 1800 mV
regulator: SWBST:
regulator: VIOHI:
regulator: VPLL: 1050 <--> 1800 mV at 1800 mV
regulator: VDIG: 1200 mV
regulator: VSD: 1800 <--> 3150 mV at 3150 mV
regulator: VUSB2: 2400 <--> 2775 mV at 2600 mV
regulator: VVIDEO: 2775 mV
regulator: VAUDIO: 2300 <--> 3000 mV at 3000 mV
regulator: VCAM: 2500 <--> 3000 mV at 2750 mV fast normal
regulator: VGEN1: 3150 mV
regulator: VGEN2: 1200 <--> 3150 mV at 3150 mV
regulator: VGEN3: 1800 mV
regulator: VUSB:
regulator: GPO1:
regulator: GPO2:
regulator: GPO3:
regulator: GPO4:
PMIC ADC start probe
PMIC Light successfully loaded
Device spi3.0 probed
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
LPMode driver module loaded
Static Power Management for Freescale i.MX5
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
msgmni has been set to 500
alg: No test for stdrng (krng)
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
tps65180->vcom_uV= -1250000
regulator: DISPLAY:
regulator: VCOM: -2500 <--> -300 mV
regulator: V3P3_CTRL:
regulator: PMIC_TEMP: at 0 mV
regulator: PWR0_CTRL:
regulator: PWR2_CTRL:
tps65180 0-0068: PMIC TPS6518x for eInk display
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX
console [ttymxc0] enabled, bootconsole disabled
mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX
loop: module loaded
PMIC powerkey probe
aigo_register_home_key_handler(), GPIO_4_1 irq request success.
input: mxc_power_key as /devices/virtual/input/input0
neonode driver data allocated
neonode input device allocated
input: neonode_ts as /devices/virtual/input/input1
neonode input touchscreen loaded
touchscreen IRQ request complete
mc13892 rtc probe start
pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
mc13892 rtc probe succeed
i2c /dev entries driver
APM Battery Driver
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 3 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 0 irq 2 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc2: SDHCI detect irq 243 irq 1 INTERNAL DMA
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
epdc waveform: E60_V220
epdc pwrdown delay: 0
Console: switching to colour frame buffer device 100x37
mxc_epdc_fb mxc_epdc_fb: Display HW not properly initialized. Aborting update.
regulator_init_complete: disabling PWR2_CTRL
regulator_init_complete: disabling PWR0_CTRL
regulator_init_complete: disabling PMIC_TEMP
regulator_init_complete: disabling VCOM
pmic_rtc pmic_rtc.1: setting system clock to 2011-12-28 19:20:41 UTC (1325100041)
Waiting for root device /dev/mmcblk0p1...
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 M2G1DE 1.86 GiB
mmcblk0: p1 p2 p3
EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 2738
EXT4-fs (mmcblk0p1): 1 orphan inode deleted
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
Freeing init memory: 108K
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
DVFS is started
usb unplugged
epdc pwrdown delay: 100
lit_ctl
command exec successfully!
lit_ctl
set 3 cur 1
command exec successfully!
lit_ctl
set 3 dc 0
command exec successfully!
lit_ctl
set 3 bp 0
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
set 4 cur 1
command exec successfully!
lit_ctl
set 4 dc 0
command exec successfully!
lit_ctl
set 4 bp 0
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
set 5 cur 1
command exec successfully!
lit_ctl
set 5 dc 0
command exec successfully!
lit_ctl
set 5 bp 0
command exec successfully!
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pmic_battery_suspend
DVFS is stopped
PM: suspend of devices complete after 1.265 msecs
PM: late suspend of devices complete after 0.215 msecs
PM: early resume of devices complete after 0.156 msecs
DVFS is started
pmic_battery_resume
PM: resume of devices complete after 130.866 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pmic_battery_suspend
DVFS is stopped
PM: suspend of devices complete after 1.260 msecs
PM: late suspend of devices complete after 0.215 msecs
PM: early resume of devices complete after 0.155 msecs
DVFS is started
pmic_battery_resume
PM: resume of devices complete after 130.441 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pmic_battery_suspend
DVFS is stopped
PM: suspend of devices complete after 1.276 msecs
PM: late suspend of devices complete after 0.220 msecs
PM: early resume of devices complete after 0.156 msecs
DVFS is started
pmic_battery_resume
PM: resume of devices complete after 130.470 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pmic_battery_suspend
DVFS is stopped
PM: suspend of devices complete after 1.250 msecs
PM: late suspend of devices complete after 0.217 msecs
PM: early resume of devices complete after 0.156 msecs
DVFS is started
pmic_battery_resume
PM: resume of devices complete after 130.482 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
[semco] ar6000_pm_probe
[semco] call plat_setup_power_stub!
mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
mmc1: new high speed SDIO card at address 0001
[semco] Host Rev: 0x3000016c(3.0.0.364)-r57
AR6000: configuration opcode 3 is not used for Linux SDIO stack
[semco] Target Rev: 0x30000384(3.0.0.900)
AR6000: configuration opcode 3 is not used for Linux SDIO stack
HIF Interrupt processing is SYNC ONLY
AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
AR6000: configuration opcode 5 is not used for Linux SDIO stack
In aggr_init..
going out of aggr_init..status OK
[semco] ath6k/AR6003/hw2.0/A30H_Generic_20101118.bin
[semco] ath6k/AR6003/hw2.0/otp.bin.z77
[semco] ath6k/AR6003/hw2.0/athwlan.bin.z77
[semco] ath6k/AR6003/hw2.0/data.patch.bin
ar6000_init() Got WMI @ 0x8f2c15a0.
Target Ready: credits: 25 credit size: 1664
AR6K: ** HIF layer does not support scatter requests (17)
AR6K: virtual scatter transfers enabled (max scatter items:16: maxlen:16384)
AR6K: max recv: 16384 max send: 12288
ar6000_init() WMI is ready
wmi_control_rx() : Unknown id 0x101e
AR6000 Reg Code = 0x61
debug_hdr_ptr: 0x541e40
AR6000: SDIO bus operation failed! MMC stack returned : -110
Cannot write 0x4000 to window reg: 0x478
Failed to reset target
aggr_module_destroy(): aggr = 8f658000
out aggr_module_destroy
[semco] ar6000_pm_remove
[semco] call plat_setup_power_stub!
[semco] ar6000_pm_probe
[semco] call plat_setup_power_stub!
ar6k_wlan: probe of mmc1:0001:1 failed with error -110
mmc1: card 0001 removed
mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
mmc1: new high speed SDIO card at address 0001
[semco] Host Rev: 0x3000016c(3.0.0.364)-r57
AR6000: configuration opcode 3 is not used for Linux SDIO stack
[semco] Target Rev: 0x30000384(3.0.0.900)
AR6000: configuration opcode 3 is not used for Linux SDIO stack
HIF Interrupt processing is SYNC ONLY
AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
AR6000: configuration opcode 5 is not used for Linux SDIO stack
In aggr_init..
going out of aggr_init..status OK
[semco] ath6k/AR6003/hw2.0/A30H_Generic_20101118.bin
[semco] ath6k/AR6003/hw2.0/otp.bin.z77
[semco] ath6k/AR6003/hw2.0/athwlan.bin.z77
[semco] ath6k/AR6003/hw2.0/data.patch.bin
ar6000_init() Got WMI @ 0x8f5587a0.
Target Ready: credits: 25 credit size: 1664
AR6K: ** HIF layer does not support scatter requests (17)
AR6K: virtual scatter transfers enabled (max scatter items:16: maxlen:16384)
AR6K: max recv: 16384 max send: 12288
ar6000_init() WMI is ready
wmi_control_rx() : Unknown id 0x101e
AR6000 Reg Code = 0x61
AR6000 scan complete: 0
AR6000 scan complete: 0
AR6000 scan complete: 0
AR6000 scan complete: 0
Add Filter 0 = 5e:00:00:01
AR6000 scan complete: 0
Keep Filter 0 = 5e:00:00:01
AR6000 scan complete: 0
channel hint set to 2472
WMM params
AC 0, ACM 0, AIFSN 2, CWmin 3, CWmax 10, TXOPlimit 64
AC 1, ACM 0, AIFSN 7, CWmin 4, CWmax 10, TXOPlimit 0
AC 2, ACM 0, AIFSN 2, CWmin 3, CWmax 4, TXOPlimit 94
AC 3, ACM 0, AIFSN 2, CWmin 2, CWmax 3, TXOPlimit 47
AR6000 connected event on freq 2472
with bssid 00:0b:6b:22:5c:15 listenInterval=3, beaconInterval = 100, beaconIeLen = 28 assocReqLen=74 assocRespLen =48
Network: Infrastructure
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
Keep Filter 0 = 5e:00:00:01
Keep Filter 0 = 5e:00:00:01
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
AR6000 Neighbor Report Event
bssid 00:0b:6b:22:5c:15
Last modified
12 years ago
Last modified on 12/28/11 20:33:11
Note:
See TracWiki
for help on using the wiki.
