wiki:RouterBoard260GSP

Version 8 (modified by Rick van der Zwet, 7 years ago) ( diff )

--

Firmware update using dnsmasq

I using using a Fedora 25 system and the RB260GSP port 1 is connected to my ethernet port (enp4s0).

Stopping firewall to allow DHCP/TFTP inbound

sudo systemctl stop firewalld

Firmware file needs specific name

cp swos-rb260-1.17.lzb /tmp/fw.260
cd /tmp

Starting dnsmasq with TFTP/bootp option

sudo dnsmasq --interface enp4s0 --bind-interfaces --no-daemon --port 0 --dhcp-range 192.168.1.100,192.168.1.200,12h  --dhcp-authoritative \
  --dhcp-host=00:00:00:00:01:01,192.168.1.101 --enable-tftp --tftp-root=`pwd` --log-queries --log-dhcp

Start firmware upgrade:

  1. Power-off RB260GSP
  2. Press-and-hold reset button
  3. Power-on RB260GSP
  4. Wait till ACT led starts flashing very fast (it first flashes slowly).

Debugging

When using tcpdump under FreeBSD the VLAN 802.11Q tags are not displayed. Using this trick will show VLAN information on interface vr1:

tcpdump -i vr1 -Uw - | tcpdump -en -r -

Factory Default

IP: 192.168.88.1
Username: admin
Password: <none>

Attachments (1)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.